5303
PROPOSED STANDARD
Three-Way Handshake for IS-IS Point-to-Point Adjacencies
Authors: D. Katz, R. Saluja, D. Eastlake 3rd
Date: October 2008
Area: rtg
Working Group: isis
Stream: IETF
Obsoletes:
RFC 3373
Abstract
The IS-IS routing protocol (Intermediate System to Intermediate System, ISO 10589) requires reliable protocols at the link layer for point-to-point links. As a result, it does not use a three-way handshake when establishing adjacencies on point-to-point media. This paper defines a backward-compatible extension to the protocol that provides for a three-way handshake. It is fully interoperable with systems that do not support the extension.
Additionally, the extension allows the robust operation of more than 256 point-to-point links on a single router.
This extension has been implemented by multiple router vendors; this paper is provided to the Internet community in order to allow interoperable implementations to be built by other vendors. [STANDARDS-TRACK]
RFC 5303
PROPOSED STANDARD
Errata Exist
Network Working Group D. Katz
Request for Comments: 5303 Juniper Networks
Obsoletes: <a href="./rfc3373">3373</a> R. Saluja
Category: Standards Track Tenet Technologies
D. Eastlake 3rd
Eastlake Enterprises
October 2008
<span class="h1">Three-Way Handshake for IS-IS Point-to-Point Adjacencies</span>
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Abstract
The IS-IS routing protocol (Intermediate System to Intermediate
System, ISO 10589) requires reliable protocols at the link layer for
point-to-point links. As a result, it does not use a three-way
handshake when establishing adjacencies on point-to-point media.
This paper defines a backward-compatible extension to the protocol
that provides for a three-way handshake. It is fully interoperable
with systems that do not support the extension.
Additionally, the extension allows the robust operation of more than
256 point-to-point links on a single router.
This extension has been implemented by multiple router vendors; this
paper is provided to the Internet community in order to allow
interoperable implementations to be built by other vendors.
<span class="grey">Katz, et al. Standards Track [Page 1]</span><span id="page-2" ></span>
<span class="grey"><a href="./rfc5303">RFC 5303</a> Three-Way Handshake for IS-IS October 2008</span>
Table of Contents
<a href="#section-1">1</a>. Introduction ....................................................<a href="#page-2">2</a>
<a href="#section-1.1">1.1</a>. Terminology ................................................<a href="#page-3">3</a>
<a href="#section-2">2</a>. Overview of Extensions ..........................................<a href="#page-3">3</a>
<a href="#section-2.1">2.1</a>. Handshaking ................................................<a href="#page-3">3</a>
<a href="#section-2.2">2.2</a>. More than 256 Interfaces ...................................<a href="#page-4">4</a>
<a href="#section-3">3</a>. Details .........................................................<a href="#page-5">5</a>
<a href="#section-3.1">3.1</a>. Syntax .....................................................<a href="#page-5">5</a>
<a href="#section-3.2">3.2</a>. Elements of Procedure ......................................<a href="#page-6">6</a>
<a href="#section-4">4</a>. IANA Considerations .............................................<a href="#page-8">8</a>
<a href="#section-5">5</a>. Security Considerations .........................................<a href="#page-9">9</a>
<a href="#section-6">6</a>. Changes from <a href="./rfc3373">RFC 3373</a> ...........................................<a href="#page-9">9</a>
<a href="#section-7">7</a>. Acknowledgements ................................................<a href="#page-9">9</a>
<a href="#section-8">8</a>. Normative References ............................................<a href="#page-9">9</a>
<a href="#section-9">9</a>. Informative References ..........................................<a href="#page-9">9</a>
<span class="h2"><a class="selflink" id="section-1" href="#section-1">1</a>. Introduction</span>
The IS-IS protocol [<a href="#ref-ISIS" title=""Intermediate System to Intermediate System intra- domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)"">ISIS</a>] assumes certain requirements stated in ISO
10589 (<a href="#section-6.7.2">section 6.7.2</a>) for the operation of IS-IS over point-to-point
links and hence provides only a two-way handshake when establishing
adjacencies on point-to-point links. The protocol does not operate
correctly if these subnetwork requirements for point-to-point links
are not met. The basic mechanism defined in the standard is that
each side declares the other side to be reachable if a Hello packet
is heard from it. Once this occurs, each side then sends a Complete
Sequence Number PDU (CSNP) to trigger database synchronization.
Three failure modes are known. First, if the link goes down and then
comes back up, or one of the systems restarts, and the CSNP packet is
lost, and the network has a cut set of one through the link, the link
state databases on either side of the link will not synchronize for a
full Link State Protocol Data Unit (LSP) refresh period (up to 18
hours).
A second, more serious failure is that if the link fails in only one
direction, the failure will only be detected by one of the systems.
Normally only one of the two systems will announce the adjacency in
its link state packets, and the SPF algorithm will thus ignore the
link. However, if there are two parallel links between systems and
one of them fails in one direction, SPF will still calculate paths
between the two systems, and the system that does not notice the
failure will attempt to pass traffic down the failed link (in the
direction that does not work).
The third issue is that on some physical layers, the
interconnectivity between endpoints can change without causing a
<span class="grey">Katz, et al. Standards Track [Page 2]</span><span id="page-3" ></span>
<span class="grey"><a href="./rfc5303">RFC 5303</a> Three-Way Handshake for IS-IS October 2008</span>
link-layer-down condition. In this case, a system may receive
packets that are actually destined for a different system (or a
different link on the same system). The receiving system may end up
thinking that it has an adjacency with the remote system when in fact
the remote system is adjacent with a third system.
The solution proposed here ensures correct operation of the protocol
over unreliable point-to-point links. As part of the solution to the
three-way handshaking issue, a method is defined to remove the
limitation of 255 point-to-point interfaces imposed by IS-IS [<a href="#ref-ISIS" title=""Intermediate System to Intermediate System intra- domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)"">ISIS</a>].
This method is more robust than the ad hoc methods currently in use.
<span class="h3"><a class="selflink" id="section-1.1" href="#section-1.1">1.1</a>. Terminology</span>
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [<a href="./rfc2119" title=""Key words for use in RFCs to Indicate Requirement Levels"">RFC2119</a>].
<span class="h2"><a class="selflink" id="section-2" href="#section-2">2</a>. Overview of Extensions</span>
This section provides a general overview of the three-way handshaking
provided and how more than 256 interfaces are handled.
<span class="h3"><a class="selflink" id="section-2.1" href="#section-2.1">2.1</a>. Handshaking</span>
The intent is to provide a three-way handshake for point-to-point
adjacency establishment in a backward-compatible fashion. This is
done by providing an optional mechanism that allows each system to
report its adjacency three-way state, thus allowing a system to only
declare an adjacency to be up if it knows that the other system is
receiving its IS-IS Hello (IIH) packets.
The adjacency three-way state can be one of the following types:
Down
This is the initial point-to-point adjacency three-way state. The
system has not received any IIH packet containing the three-way
handshake option on this point-to-point circuit.
Initializing
The system has received an IIH packet containing the three-way
handshake option from a neighbor but does not know whether the
neighbor is receiving its IIH packet.
Up
The system knows that the neighbor is receiving its IIH packets.
<span class="grey">Katz, et al. Standards Track [Page 3]</span><span id="page-4" ></span>
<span class="grey"><a href="./rfc5303">RFC 5303</a> Three-Way Handshake for IS-IS October 2008</span>
The adjacency three-way state that is reported by this mechanism is
not equal or equivalent to the adjacency state that is described in
ISO 10589 [<a href="#ref-ISIS" title=""Intermediate System to Intermediate System intra- domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)"">ISIS</a>]. If this mechanism is supported, then an adjacency
may have two states, its state as defined in ISO 10589 [<a href="#ref-ISIS" title=""Intermediate System to Intermediate System intra- domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)"">ISIS</a>], and
its three-way state. For example, according to ISO 10589, receipt of
an Intermediate System Hello (ISH) will cause an adjacency to go to
Initializing state; however, receipt of an ISH will have no effect on
the three-way state of an adjacency, which remains firmly Down until
it receives an IIH from a neighbor that contains the three-way
handshaking option.
In addition, the neighbor's system ID and (newly defined) extended
circuit ID are reported in order to detect the case where the same
stream is being received by multiple systems (only one of which can
talk back).
The mechanism is quite similar to the one defined in the Netware Link
Services Protocol (NLSP) [<a href="#ref-NetLink" title=""Netware Link Services Protocol Specification, Version 1.0"">NetLink</a>], a variant of IS-IS used for
routing Internetwork Packet Exchange (IPX) traffic. The difference
between this mechanism and the one used in NLSP is the location where
the information is carried (NLSP uses two of the reserved bits in the
IIH header, whereas this solution adds a separate option to the IIH),
and the presence of the neighbor's system ID and circuit ID. In
theory, using the reserved header bits should be backward compatible,
since systems are supposed to ignore them. However, it was felt that
this was risky, as the use of untested mechanisms such as this have
led to problems in the past in other protocols. New option codes, on
the other hand, have been demonstrated to work properly, as the
deployment of Integrated IS-IS for IP [<a href="./rfc1195" title=""Use of OSI IS-IS for routing in TCP/IP and dual environments"">RFC1195</a>] has done exactly
this.
The new mechanism only comes into play when the remote system
includes the new option in its IIH packet; if the option is not
present, it is assumed that the system does not support the new
mechanism, and so the old procedures are used.
<span class="h3"><a class="selflink" id="section-2.2" href="#section-2.2">2.2</a>. More than 256 Interfaces</span>
The IS-IS specification has an implicit limit of 256 interfaces, as
constrained by the eight-bit Circuit ID field carried in various
packets. Moderately clever implementers have realized that the only
true constraint is that of 256 LAN interfaces, and for that matter
only 256 LAN interfaces for which a system is the Designated IS.
This is because the only place that the circuit ID is advertised in
LSPs is in the pseudo-node LSP ID.
<span class="grey">Katz, et al. Standards Track [Page 4]</span><span id="page-5" ></span>
<span class="grey"><a href="./rfc5303">RFC 5303</a> Three-Way Handshake for IS-IS October 2008</span>
Implementers have treated the point-to-point circuit ID number space
as being independent from that of the LAN interfaces, since these
circuit IDs appear only in IIH PDUs and are only used for detection
of a change in identity at the other end of a link. More than 256
point-to-point interfaces have been supported by sending the same
circuit ID on multiple interfaces. This reduces the robustness of
the ID change detection algorithm, since it would then be possible to
switch links between interfaces on a system without detecting the
change.
Since the circuit ID is an integral part of the new handshaking
mechanism, a backward-compatible mechanism for expanding the circuit
ID number space is included in this specification.
<span class="h2"><a class="selflink" id="section-3" href="#section-3">3</a>. Details</span>
The detailed syntax and procedures for this IS-IS option are given
below.
<span class="h3"><a class="selflink" id="section-3.1" href="#section-3.1">3.1</a>. Syntax</span>
A new IS-IS Option type, "Point-to-Point Three-Way Adjacency", is
defined:
Type - 0xF0 (decimal 240)
Length - total length of the value field (1 to 17 octets)
Value -
No. of Octets
+-----------------------------------+
| Adjacency Three-Way State | 1
+-----------------------------------+
| Extended Local Circuit ID | 4
+-----------------------------------+
| Neighbor System ID | ID Length
+-----------------------------------+
| Neighbor Extended Local Circuit ID| 4
+-----------------------------------+
Adjacency Three-Way State
The adjacency three-way state of the point-to-point adjacency.
The following values are defined:
0 - Up
1 - Initializing
2 - Down
<span class="grey">Katz, et al. Standards Track [Page 5]</span><span id="page-6" ></span>
<span class="grey"><a href="./rfc5303">RFC 5303</a> Three-Way Handshake for IS-IS October 2008</span>
Extended Local Circuit ID
Unique ID assigned to this circuit when it is created by this
Intermediate system.
Neighbor System ID
System ID of neighboring Intermediate system if known. The length
of this field is equal to "ID Length" of the IIH PDU described in
"Point-to-point IS to IS hello PDU" (section 9.7 of [<a href="#ref-ISIS" title=""Intermediate System to Intermediate System intra- domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)"">ISIS</a>]).
Neighbor Extended Local Circuit ID
Extended Local Circuit ID of the other end of the point-to-point
adjacency if known.
Any system that supports this mechanism SHALL include this option in
its Point-to-Point IIH packets.
Any system that does not understand this option SHALL ignore it, and
(of course) SHALL NOT include it in its own IIH packets.
Any system that supports this mechanism MUST include the Adjacency
Three-Way State field in this option. The other fields in this
option SHOULD be included as explained below in <a href="#section-3.2">section 3.2</a>.
Any system that is able to process this option SHALL follow the
procedures below.
<span class="h3"><a class="selflink" id="section-3.2" href="#section-3.2">3.2</a>. Elements of Procedure</span>
The new handshake procedure is added to the IS-IS point-to-point IIH
state machine after the PDU acceptance tests have been performed.
Although the extended circuit ID is only used in the context of the
three-way handshake, it is worth noting that it effectively protects
against the unlikely event where a link is moved to another interface
on a system that has the same local circuit ID, because the received
PDUs will be ignored (via the checks defined below) and the existing
adjacency will fail.
Add a clause e) to the end of "Receiving ISH PDUs by an intermediate
system" (section 8.2.2 of [<a href="#ref-ISIS" title=""Intermediate System to Intermediate System intra- domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)"">ISIS</a>]):
Set the state to be reported in the Adjacency Three-Way State
field of the Point-to-Point Three-Way Adjacency option to Down.
<span class="grey">Katz, et al. Standards Track [Page 6]</span><span id="page-7" ></span>
<span class="grey"><a href="./rfc5303">RFC 5303</a> Three-Way Handshake for IS-IS October 2008</span>
Add a clause e) to the end of "Sending point-to-point IIH PDUs"
(section 8.2.3 of [<a href="#ref-ISIS" title=""Intermediate System to Intermediate System intra- domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)"">ISIS</a>]):
The IS SHALL include the Point-to-Point Three-Way Adjacency option
in the transmitted Point-to-Point IIH PDU. The current three-way
state of the adjacency with its neighbor on the link (as defined
in new <a href="#section-8.2.4.1.1">section 8.2.4.1.1</a> introduced later in the document) SHALL
be reported in the Adjacency Three-Way State field. If no
adjacency exists, the state SHALL be reported as Down.
The Extended Local Circuit ID field SHALL contain a value assigned
by this IS when the circuit is created. This value SHALL be
unique among all the circuits of this Intermediate System. The
value is not necessarily related to that carried in the Local
Circuit ID field of the IIH PDU.
If the system ID and Extended Local Circuit ID of the neighboring
system are known (in adjacency three-way state Initializing or
Up), the neighbor's system ID SHALL be reported in the Neighbor
System ID field, and the neighbor's Extended Local Circuit ID
SHALL be reported in the Neighbor Extended Local Circuit ID field.
Add a <a href="#section-8.2.4.1.1">section 8.2.4.1.1</a>, "Three-Way Handshake", immediately prior to
"IIH PDU Processing" (section 8.2.4.2 of [<a href="#ref-ISIS" title=""Intermediate System to Intermediate System intra- domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)"">ISIS</a>]):
A received Point-to-Point IIH PDU may or may not contain the
Point-to-Point Three-Way Adjacency option. If it does not, the
link is assumed to be functional in both directions, and the
procedures described in <a href="#section-8.2.4.2">section 8.2.4.2</a> are followed.
If the option is present and contains invalid Adjacency Three-Way
State, the PDU SHALL be discarded and no further action is taken.
If the option with a valid Adjacency Three-Way State is present,
the Neighbor System ID and Neighbor Extended Local Circuit ID
fields, if present, SHALL be examined. If they are present, and
the Neighbor System ID contained therein does not match the local
system's ID, or the Neighbor Extended Local Circuit ID does not
match the local system's extended circuit ID, the PDU SHALL be
discarded and no further action is taken.
If the Neighbor System ID and Neighbor Extended Local Circuit ID
fields match those of the local system, or are not present, the
procedures described in <a href="#section-8.2.4.2">section 8.2.4.2</a> are followed with the
following changes:
<span class="grey">Katz, et al. Standards Track [Page 7]</span><span id="page-8" ></span>
<span class="grey"><a href="./rfc5303">RFC 5303</a> Three-Way Handshake for IS-IS October 2008</span>
a) In <a href="#section-8.2.4.2">section 8.2.4.2</a> a and b, the action "Up" from state tables
5, 6, 7, and 8 may create a new adjacency but the three-way
state of the adjacency SHALL be Down.
b) If the action taken from <a href="#section-8.2.4.2">section 8.2.4.2</a> a or b is "Up" or
"Accept", the IS SHALL perform the action indicated by the new
adjacency three-way state table below, based on the current
adjacency three-way state and the received Adjacency Three-Way
State value from the option. (Note that the procedure works
properly if neither field is ever included. This provides
backward compatibility to an earlier version of this option.)
Received Adjacency Three-Way State
Down Initializing Up
--------------------------------------
Down | Initialize Up Down
|
Adj. Initializing | Initialize Up Up
Three- |
Way Up | Initialize Accept Accept
State |
|
Adjacency Three-Way State Table
If the new action is "Down", an adjacencyStateChange(Down)
event is generated with the reason "Neighbor restarted" and the
adjacency SHALL be deleted.
If the new action is "Initialize", no event is generated and
the adjacency three-way state SHALL be set to "Initializing".
If the new action is "Up", an adjacencyStateChange(Up) event is
generated.
c) Skip <a href="#section-8.2.4.2">section 8.2.4.2</a> c and d.
d) If the new action is "Initialize", "Up", or "Accept", follow
<a href="#section-8.2.4.2">section 8.2.4.2</a> e.
<span class="h2"><a class="selflink" id="section-4" href="#section-4">4</a>. IANA Considerations</span>
This document specifies IS-IS Option 240 (0xF0), which has already
been allocated. See [<a href="./rfc3359" title=""Reserved Type, Length and Value (TLV) Codepoints in Intermediate System to Intermediate System"">RFC3359</a>].
<span class="grey">Katz, et al. Standards Track [Page 8]</span><span id="page-9" ></span>
<span class="grey"><a href="./rfc5303">RFC 5303</a> Three-Way Handshake for IS-IS October 2008</span>
<span class="h2"><a class="selflink" id="section-5" href="#section-5">5</a>. Security Considerations</span>
This document raises no new security issues for IS-IS. IS-IS
security may be used to secure the IS-IS messages discussed here.
See [<a href="./rfc5304" title=""IS-IS Cryptographic Authentication"">RFC5304</a>].
<span class="h2"><a class="selflink" id="section-6" href="#section-6">6</a>. Changes from <a href="./rfc3373">RFC 3373</a></span>
This document is a minor edit of [<a href="./rfc3373" title=""Three-Way Handshake for Intermediate System to Intermediate System (IS-IS) Point- to-Point Adjacencies"">RFC3373</a>] with the intent of
advancing it from Informational to Standards Track. It also updates
the ISP 10589 reference to refer to the current "2002" version.
<span class="h2"><a class="selflink" id="section-7" href="#section-7">7</a>. Acknowledgements</span>
Thanks to Tony Li, Henk Smit, Naiming Shen, Dave Ward, Jeff Learman,
Les Ginsberg, and Philip Christian for their contributions to the
document.
<span class="h2"><a class="selflink" id="section-8" href="#section-8">8</a>. Normative References</span>
[<a id="ref-ISIS">ISIS</a>] ISO, "Intermediate System to Intermediate System intra-
domain routeing information exchange protocol for use in
conjunction with the protocol for providing the
connectionless-mode network service (ISO 8473)",
International Standard 10589:2002, Second Edition, 2002.
[<a id="ref-NetLink">NetLink</a>] "Netware Link Services Protocol Specification, Version
1.0", Novell, Inc., February 1994.
[<a id="ref-RFC1195">RFC1195</a>] Callon, R., "Use of OSI IS-IS for routing in TCP/IP and
dual environments", <a href="./rfc1195">RFC 1195</a>, December 1990.
[<a id="ref-RFC2119">RFC2119</a>] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", <a href="https://www.rfc-editor.org/bcp/bcp14">BCP 14</a>, <a href="./rfc2119">RFC 2119</a>, March 1997.
<span class="h2"><a class="selflink" id="section-9" href="#section-9">9</a>. Informative References</span>
[<a id="ref-RFC3373">RFC3373</a>] Katz, D. and R. Saluja, "Three-Way Handshake for
Intermediate System to Intermediate System (IS-IS) Point-
to-Point Adjacencies", <a href="./rfc3373">RFC 3373</a>, September 2002.
[<a id="ref-RFC3359">RFC3359</a>] Przygienda, T., "Reserved Type, Length and Value (TLV)
Codepoints in Intermediate System to Intermediate System",
<a href="./rfc3359">RFC 3359</a>, August 2002.
[<a id="ref-RFC5304">RFC5304</a>] Li, T. and R. Atkinson, "IS-IS Cryptographic
Authentication", <a href="./rfc5304">RFC 5304</a>, October 2008.
<span class="grey">Katz, et al. Standards Track [Page 9]</span><span id="page-10" ></span>
<span class="grey"><a href="./rfc5303">RFC 5303</a> Three-Way Handshake for IS-IS October 2008</span>
Authors' Addresses
Dave Katz
Juniper Networks
1194 N. Mathilda Ave.
Sunnyvale, CA 94089
USA
Phone: +1-408-745-2073
EMail: [email protected]
Rajesh Saluja
Tenet Technologies
30/31, 100 Feet Road, Madiwala
Bangalore - 560 068
INDIA
Phone: +91 80 552 2215
EMail: [email protected]
Donald E. Eastlake 3rd
Eastlake Enterprises
155 Beaver Street
Milford, MA 01757
USA
Phone: +1-508-634-2066
EMail: [email protected]
<span class="grey">Katz, et al. Standards Track [Page 10]</span><span id="page-11" ></span>
<span class="grey"><a href="./rfc5303">RFC 5303</a> Three-Way Handshake for IS-IS October 2008</span>
Full Copyright Statement
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions
contained in <a href="https://www.rfc-editor.org/bcp/bcp78">BCP 78</a>, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in <a href="https://www.rfc-editor.org/bcp/bcp78">BCP 78</a> and <a href="https://www.rfc-editor.org/bcp/bcp79">BCP 79</a>.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
<a href="http://www.ietf.org/ipr">http://www.ietf.org/ipr</a>.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
[email protected].
Katz, et al. Standards Track [Page 11]
Annotations
Select text to annotate